Department of ECE

2020-21 Academic Year


1. Mr. Shaik Imtiyaz Hussain, “New Approach Using an IoT Robot to Oversight the Smart Home Environment”, National Conference on Advances in Engineering Management and Sciences, 19-11-2020, Santhiram Engineering College, Nandyal.

2. Mr. Yerragudi Mahesh,“Design of XOR/XNOR Circuits for Hybrid Full Adder”,4th National Conference on Control Computation and Communication - NCCCC 2020, 28-12-2020, Santhiram Engineering College, Nandyal.

3. Ms. G.Hima Bindu,” Analysis and Design of InP and GaAs Double Gate MOSFET Transistors for Low Power Applications”,4th National Conference on Control Computation and Communication - NCCCC 2020, 28-12-2020, Santhiram Engineering College, Nandyal.

4. Mr. Shaik Abdul Malik,” Design Microstrip Patch Antenna with Band Notched Characteristics for Ultra-wide Band Applications”,4th National Conference on Control Computation and Communication - NCCCC 2020, 28-12-2020, Santhiram Engineering College, Nandyal.

5. Mr. C.V.Subhakar Reddy,” A Review on Reliability and Latency-Aware Routing Framework for 5G Transport Infrastructures”,4th National Conference on Control Computation and Communication - NCCCC 2020, 28-12-2020,Santhiram Engineering College, Nandyal.

6. Ms. B.Alekhya Hima Bindu,” Using Binary Tree Structure In WSN, A Novel Method For Reducing Energy Consumption”,4th National Conference on Control Computation and Communication - NCCCC 2020, 28-12-2020,Santhiram Engineering College, Nandyal.

7. Mr. K.Kameswar Reddy,” Heterogeneous UAV Cells for Maximum Coverage Performance”,4th National Conference on Control Computation and Communication - NCCCC 2020, 28-12-2020,Santhiram Engineering College, Nandyal.

8. Mr. Sreenivasa Rao N,” Real-time and Low-cost IoT Based Farming Using Raspberry Pi”, National Conference on Control Computation And Communications NCCCC -2020,28-12-2020, Santhiram Engineering College.

9. Mr. M. Mahesh Kumar,” A Honeycomb-Shaped Planar Monopole Antenna for Broad Band Application”,National Conference on Control, Computation And Communications NCCCC -2020,28-12-2020, Santhiram Engineering College.

10. Ms. B.Alekhya Hima Bindu,” Charge Pump Topologies for the Power Management of IoT Nodes”, 4th National Conference on Control Computation and Communication - NCCCC 2020,28-12-2020,Santhiram Engineering College, Nandyal.

11. Mr. M.Anil Kumar,” Traffic Light and Sign Detection For Autonomous Land Vehicle Using RASPBERRY PI”,4th National Conference on Control Computation and Communication - NCCCC 2020,28-12-2020,Santhiram Engineering College, Nandyal.

12. Ms. A.Anuradha,” ALU Design using GDI Technique for Low Power and Low Area”,4th National Conference on Control Computation and Communication - NCCCC 2020,28-12-2020,Santhiram Engineering College, Nandyal.

13. Dr Y. Mallikarjuna Rao,” Software Defined Wireless Mesh Networks: Architecture, Challenges and Research Issues”, 4 th National Conference on Control, Computation and Communications,28-12-2020, Department of Electronics & Communication Engineering,Santhiram Engineering College.

14. Mr. Sanivarapu Rambabu,” Optimum LAP Altitude for Maximum Coverage”, NCCCC-2020,28-12-2020, SREC.

15. Mr. S Girishbabu,” Design of A Reversible Logic Carry Dependent Sum Adder”,National Conference On Control, Computation And Communications NCCCC -2020,28-12-2020, Santhiram Engineering College, Nandyal.

16. Mrs. Jayamangala Sristi,” Verification and Syntax Check of Verilog HDL and LEF Files”, NCCCC-2020,28-12-2020, Santhiram Engineering College, Nandyal.

17. Mrs. Nagamani Thanuboddi,” Wireless Backhaul Optimization in 5G Dynamic Heterogeneous Scenarios”, NCCCC-2020, Santhiram Engineering College, Nandyal.

18. Mrs. Nagamani Thanuboddi,” Cloud Storage for Resource Constrained Mobile Devices in Current Trends”, NCCCC-2020, Santhiram Engineering College, Nandyal.


2019-20 Academic Year


1. Mr. S Venkatesan,“Software Performance Evaluation of a Polar Satellite Antenna Control Embedded System”, National Conference on Control, Computation and Communications,13-06-2020, Santhiram Engineering college, Nandyal.

2. Mr. S Venkatesan,“Implementation of PS2 Keyboard Controller IP Core for on Chip Embedded System Applications”, National Conference on Control, Computation and Communications,13-06-2020, Santhiram Engineering college, Nandyal.

3. Mr. A Vinoth,“Implementation of Smart Industrial Automation System using Embedded WEB,” National Conference on Control, Computation and Communications,13-06-2020, Santhiram Engineering college, Nandyal.

4. Mr. A Vinoth, “Scheduling Policy and its Performance for the Embedded Real Time System,” National Conference on Control Computation and Communications,13-06-2020, Santhiram Engineering college, Nandyal.

5. Mr. Syed Munawwar,“A Review on Image Fusion Techniques and its Applications”,National Conference on Control Computation and Communications,13-06-2020, Santhiram Engineering college, Nandyal.

6. Mr. Syed Munawwar, “Multimodal Medical Image Fusion using DWT and NSRCXWT”, National Conference on Control Computation and Communications,13-06-2020, Santhiram Engineering college, Nandyal.

7. Mr. M. Mahesh Kumar,” Implementation of Smart Phone using ARM9 and Embedded Linux Operating System”, NCCCC2020,13-06-2020, Santhiram Engineering college, Nandyal.

8. Mr. M. Mahesh kumar, “Image Based Plant Disease Detection in Pomegranate Plant for Bacterial Blint”, NCCCC2020,13-06-2020, Santhiram Engineering College,Nandyal.

9. Mrs. Sowmya Gali,” Industrial Automation using IOT” NCCCC-2020, 13-06-2020, SREC,Nandyal.

10. Mrs. Sowmya Gali “Trust Aware routing based on energy for wireless sensor networks” NCCCC-2020, 13-06-2020, SREC,Nandyal.

11. Mr. M. Mahesh Kumar, “Schmitt Triger Design using CNTFET Technology”,NCCCC2020,13-06-2020, Santhiram Engineering college, Nandyal.

12. Mrs. Jayamangala Sristi,“Design and Analysis of 32-Bit Different Parallel Prefix Adders”, NCCCC-2020,13-06-2020, Santhiram Engineering college, Nandyal.

13. Dr Y. Mallikarjuna Rao,“A Neural Network Approach for Image Compression using K-Means Clustering”, National Conference on Control, Computation and Communications,13-06-2020, Department of Electronics & Communication Engineering, Santhiram Engineering College.

14. Mr. Sanivarapu Rambabu,” Optimized Power and Area of Design 3-Bit Digital to Analog Converter using GNRFET”, NCCCC2020,13-06-2020, Santhiram Engineering College,Nandyal.

15. Mr. Sanivarapu Rambabu, “Optimized Power and Speed of ALU using Dual Mode Logic”, NCCCC2020,13-06-2020, Santhiram Engineering College,Nandyal.

16. Mr. Sanivarapu Rambabu, “Designing of an Efficient 4-Bit ALU using GDI Technique”, NCCCC2020,13-06-2020, Santhiram Engineering College,Nandyal.

17. Mr. Sreenivasa Rao N, “Design andComparison of a Full Adder with Various Low Power Techniques for Multiplier”, National Conference on Control, Computation and Communications NCCCC-2020,13-06-2020, Santhiram Engineering College, Nandyal.

18. Mr. Sreenivasa Rao N, “A Prominent Retinal Image Analyzer for Diabetic Retinopathy”, National Conference on Control, Computation and Communications NCCCC-2020,13-06-2020, Santhiram Engineering College,Nandyal.

19. Mr. Sreenivasa Rao N, “Design of Low Power SRAM with Different Transistors using Tanner Tool”, National Conference on Control, Computation and Communications NCCCC-2020,13-06-2020, Santhiram Engineering College,Nandyal.

20. Mr. S Girish Babu, “Design of anArea Efficient and High-Speed Novel Adder”, National Conference on Control, Computation and Communications NCCCC-2020,13-06-2020, Santhiram Engineering College, Nandyal.

21. Mr. S Girish Babu, “Design of Low Power High Speed Double Tail Comparator for ADC Application”, National Conference on Control, Computation and Communications NCCCC-2020,13-06-2020, Santhiram Engineering College, Nandyal.

22. Mr. S Girish Babu, “Design of CNTFET Based Efficient Ternary Logic Full Adder”, National Conference on Control, Computation and Communications NCCCC-2020,13-06-2020, Santhiram Engineering College, Nandyal.

23. Mr. S Girish Babu, “Adaptive Image Forgery Detection Based on Contrast Enhancement For 3D Applications”, National Conference on Control, Computation and Communications NCCCC-2020,13-06-2020, Santhiram Engineering College, Nandyal.

24. Dr M V Subramanyam, “Salient Object Detection Edge Preserving and Multiscale Contextual Information”, National Conference on Control, Computation and Communications,13-06-2020, Santhiram Engineering College, Nandyal.

25. Dr M V Subramanyam, “Control  Strategies for Blood Pressure Regulation in the Diabetic Patients Post Surgery”, National Conference on Control, Computation and Communications,13-06-2020, Santhiram Engineering College, Nandyal.

26. Dr Y. Mallikarjuna Rao, “Cluster Based Hybrid Routing Mechanism for Mobility Management inWireless Mesh Networks”,National Conference on Control, Computation and Communications,13-06-2020, Department of Electronics & Communication Engineering,Santhiram Engineering College, Nandyal.

27. Ms. A. Anuradha, “Junction less Poly-SI Nano wire FET withGated Raised S/D”, National Conference on Control, Computation and Communications NCCCC-2020,13-06-2020, Santhiram Engineering College, Nandyal.

28. Ms. A.Anuradha, “Carbon Nanotube FET Technologyfor Radio Frequency Electronics: State-of-the-Art Overview”, National Conference on Control, Computation and Communications NCCCC-2020,13-06-2020, Santhiram Engineering College, Nandyal.

29. Ms. A. Anuradha, “BrainTumourRecognitionusing Neural Network”, National Conference on Control, Computation and Communications,13-06-2020, Santhiram Engineering College, Nandyal.

30. Ms. A. Anuradha, “Performance Projections for a Reconfigurable Tunnel” National Conference on Control, Computation and Communications,13-06-2020, Santhiram Engineering College, Nandyal.

31. Mr. M.Mohan Reddy, “Design of Low Power ALUusing FINFET”, National Conference on Control, Computation and Communications,13-06-2020, Santhiram Engineering College, Nandyal.

32. Mr. M. Mohan Reddy,” Parameters of Performance of 3Value 9T CNTFET SRAM Based Cell Design using H-SPICE”, National Conference on Control, Computation and Communications,13-06-2020, Santhiram Engineering College, Nandyal.

33. Mr. M. Mohan Reddy, “Investigation of Cross Talk Effects in Quaternary CNT Bundled Interconnects with CNTFET Drivers”, National Conference on Control, Computation and Communications,13-06-2020, Santhiram Engineering College, Nandyal.

34. Mr. C.V.Subhakar Reddy, “An EmbeddedSystem for Aiding Navigation of Visually Impaired Persons”, National Conference on Control, Computation and Communications,13-06-2020, Santhiram Engineering College, Nandyal.

35. Mr. Shaik Abdul malik,“Design of Microstrip Slot Antenna for X- Band Applications”, National Conference on Control, Computation and Communications,13-06-2020, Santhiram Engineering College, Nandyal.

36. Mr. Shaik Abdul malik, “Design of Split Ring Resonator Based Microstrip Antenna for X-Band Applications”, National Conference on Control, Computation and Communications,13-06-2020, Santhiram Engineering College, Nandyal.

37. Mr. Shaik Abdul Malik, “Microstrip Patch Antenna Array for WirelessCommunications”, National Conference on Control, Computation and Communications,13-06-2020, Santhiram Engineering College, Nandyal.

38. Mr. Yerragudi Mahesh, “Pattern Recognition usinga Neural Network on a Microcontroller with I2C Ultrasonic Sensors”,National Conference on Control, Computation and Communications,13-06-2020, Santhiram Engineering College, Nandyal.

39. Mr. Shaik Imtiyaz Hussain, “Implementation of Smartphone using ARM9  and Embedded LINUX Operating System: A Survey Approach”, National Conference on Control, Computation and Communications,13-06-2020, Santhiram Engineering College, Nandyal.

40. Mr. Shaik Imtiyaz Hussain, “Nanotechnology Phenomena in the Light of the Solar Energy”, National Conference on Control, Computation and Communications,13-06-2020, Santhiram Engineering College, Nandyal.

41. Ms. Sreevani Cheekati, “Design and Enactment of Improved Leakage Power Saving Technique in CMOS VLSI Circuits”,National Conference on Control, Computation and Communications,13-06-2020, Santhiram Engineering College, Nandyal.

42. Mrs. Nagamani Thanuboddi,” Audio Water Marking in Color Image by using DWT-SVD Techniques”, NCCC-2020,13-06-2020, Santhiram Engineering College, Nandyal.

43. Mr. Syed Munawwar, “Welding Defect Detection by using ImageEnhancement”, National Conference on Recent Trends in Engineering and Sciences (NCRTES-2020), 26-06-2020, SVR Engineering College, Ayyaluru Metta, Nandyal, Kurnool (Dt), A.P.

44. Mr. Syed Munawwar, “An Overview of Basic Image Fusion Techniques”, National Conference on Recent Trends in Engineering and Sciences (NCRTES-2020), 26-06-2020, SVR Engineering College, Ayyaluru Metta, Nandyal, Kurnool (Dt), A.P.

45. Mr. Syed Munawwar,”Fusion of CT and MRI Images using DWT and NSRCxWT”, National Conference on Recent Trends in Engineering and Sciences (NCRTES-2020), 26-06-2020, SVR Engineering College, Ayyaluru Metta, Nandyal, Kurnool (Dt), A.P.

46. Mr. Sreenivasa Rao N,“Design and Implementation of Shift Register with Optimization Techniques”, International Web Conference on Smart Engineering Technologies,26-06-2020, Ramco institute of Technology.

47. Mr. Syed Munawwar, “Fusion of CTand MRI Images using Non-Sub Sampled Rotated Complex Wavelet Transform (NSRCXWT)”, International Web Conference on Smart Engineering Technologies 2020 (IWCSET - 2020), 27-06-2020, Ramco Institute of Technology, Rajapalayam - 626 117, Virudhunagar District, Tamil Nadu.

48. Mrs. Vadala Nagamani,” Clever Home Assistant using Raspberry Pi”, NCCCC-2020,13-06-2020, SREC, Nandyal.

49. Mrs. Vadala Nagamani,” Individual Assistance for Senior Citizens”, NCCCC-2020,13-06-2020, SREC, Nandyal.

50. Mrs. Vadala Nagamani,”Design of low power D flipflop using sleep transistor technique based on CNTFET” NCCCC-2020,13-06-2020, SREC, Nandyal.


2018-19 Academic Year


1. Dr M V Subramanyam “E- Campus using Supersensors Nodes” National Conference on Advances in Engineering and Management -NCAMES 2018, 10-11-2018, Department of Electronics & Communication Engineering,Santhiram Engineering College

2. Dr Y. Mallikarjuna Rao,“QoS Enhanced Hierarchical Mobility Management in Wireless Mesh Networks”, National Conference on Advances in Engineering and Management -NCAMES 2018, 10-11-2018, Department of Electronics & Communication Engineering,Santhiram Engineering College.

3. Dr Y. Mallikarjuna Rao,” Wireless Mesh Networks: Issues and Challenges”, National Conference on Advances in Engineering and Management -NCAMES 2018, 10-11-2018, Department of Electronics & Communication Engineering,Santhiram Engineering College.

4. Ms. Sreevani Cheekati, “Performance Evaluation of Charge Pump for Enhancement of Gain”, National Conference on Advances in Engineering Management and Sciences,19-11-2018,Santhiram Engineering College, Nandyal.

5. Mr.K. Sampath, “Design of A Novel High-Speed Adder-Subtractor by using CNTFET”, National Conference on Advances in Engineering Management and Sciences,19-11-2018,Santhiram Engineering College, Nandyal.

6. M. Mohan Reddy “Digital Pulse Width Modulator Power Management On-Chip” National Conference on Advances in Engineering Management and Sciences,19-11-2018,Santhiram Engineering College, Nandyal.

7. Mr.Ch. Narsimhudu, “Universal Learning System for Embedded System Education and Promotion”, National Conference on Advances in Engineering Management and Sciences,19-11-2018,Santhiram Engineering College, Nandyal.

8. Mrs.V.Nagamani,“NSCT Medical Imaging Clinical Applications”, National Conference on Advances in Engineering Management and Sciences,19-11-2018,Santhiram Engineering College, Nandyal.

9. Mr. Shaik Abdul Malik,” Design and Analysis ofMicrostrip Patch Array Antenna for WLAN Applications”, National Conference on Advances in Engineering Management and Sciences,19-11-2018,Santhiram Engineering College, Nandyal.

10. Mr.Ch. Narsimhudu,” Development and Investigation on an Embedded System Based Control for Networking Mobile Robots”, NCAEMS-2018,19-11-2018, Santhiram Engineering College, Nandyal.

11. Mr. Sreenivasa Rao N, “Design of Adiabatic Offset Encoder and Decoder with Low-Cost VLSI Architecture”, 2nd National Conference on Advances in Engineering Management and Sciences (NCAEMS-2018), 19-11-2018,Santhiram Engineering College, Nandyal.

12. Mrs. Sowmya Galli, “Weighting Scale Based on Load Cell using Arduino”, NCAEMS-2018,19-11-2018, SREC,Nandyal.

13. Mrs.T. Nagamani,” Medical Image Noise Reduction using NSCT and WOA”, National Conference on Advances in Engineering Management and Sciences,19-11-2018, Santhiram Engineering College, Nandyal.

14. Mr. Sanivarapu Rambabu,“Power and Area Optimized TruncatedMultiplier”, NCAEMS-2018,19-11-2018, SREC, NANDYAL.

15. Ms. C.V.Subhakar Reddy,” Information Masters Course the Context of Embedded System Design”,19-11-2018,Santhiram Engineering College, Nandyal.

16. Mrs. Sowmya Galli Smart Home Automation System using PIC Microcontroller”, NCAEMS-2018,19-11-2018, Santhiram Engineering College, Nandyal.

17. Mr.S. Imtiyaz Hussain “New Approach using an IoT Robot to Oversight the Smart Home Environment” NCAEMS-2018,19-11-2018, Santhiram Engineering College, Nandyal


2017-18 Academic Year


1. Dr M V Subramanyam, “Integrated effect by various Atomspheric various parameters on Microwave signal”, International Conference on Advances in Engineering Management & Sciences,14-07-2017, Santhiram Engineering College, Nandyal

2. Mr. Sanivarapu Rambabu, “Mobile based Irrigation Control System using ARM7 and Sensors”, ICAEMS 2017, 14-07-2017, SREC, Nandyal.

3. Mr. Sanivarapu Rambabu, “Design and analysis of an efficient power and area magnitude comparator”, ICAEMS 2017, 14-07-2017, SREC, Nandyal.

4. Mr. Sanivarapu Rambabu, “Design of A Full Adder for Low Power Applications”, ICAEMS 2017, 14-07-2017, SREC, Nandyal.

5. Mr. Sreenivasa RaoN, “Design of a Redundant Binary Multiplier Using Parallel Prefix Adder Technique”, International Conference on Advances in Engineering Management Sciences 2k17 (ICAEMS-2017), 14-07-2017, Santhiram Engineering College, Nandyal.

6. Mr. Sreenivasa Rao N,“IoT Based Home Automation Appliance using Raspberry PI3”, International Conference on Advances in Engineering Management Sciences 2k17 (ICAEMS-2017),14-07-2017, Santhiram Engineering College.

7. Dr M V Subramanyam, “A High performance mixed signal design model for signal processing applications”, International Conference on Advances in Engineering Management & Sciences,14-07-2017, Santhiram Engineering College, Nandyal.

8. Dr M V Subramanyam,“Design and Implementation of 3D-DWT for Video Processing”, An International Conference on Advances in Engineering Management and Sciences, 14-07-2017, Santhiram Engineering College, Nandyal.

9. Dr Y. Mallikarjuna Rao, “An Enhanced Mechanism for Effective Management of Mobility in Wireless Mesh Networks”, International Conference on Advances in Engineering Management and Sciences-2017,14-07-2017, Department of Electronics & Communication Engineering,Santhiram Engineering College.

10. Mr. M. Mohan Reddy,“An Approach for Realization of Elliptic IIR Filters without Multiplier”, International Conference on Advances in Engineering Management Sciences 2k17 ,17-07-2017, Santhiram Engineering College, Nandyal.

11. Dr Y. Mallikarjuna Rao,“An Efficient Resource Management Algorithms for Mobility Management in Wireless Mesh Networks”, IEEE Conference on Energy, Communication, Data Analytics and Soft Computing, 01-08-2017, Department of Electronics & Communication Engineering, SKR Engineering College.

12. H.S Ijaz “Fractial image compression using quadtree decomposition and modified huffman coding” International Conference on Advances in Engineering Management Sciences 2k17 ,17-07-2017, Santhiram Engineering College, Nandyal.


2016-17 Academic Year


1. Mr.K.L.Narasimha,“Diverse Security Intimidation and Disputes in Mobile Adhoc Networks”, International Conference on I-SMAC,10-02-2017, St. Mother Theresa Engineering College, Thoothukudi,Tamilnadu.

2. Mr.C.V.Subhaskar Reddy,“Implementation and Performance Evaluation of Various Multi Cast Protocols in Cognitive Radio Adhoc N”, IEEE International Conference on 19 Wireless Communication Signal Processing and Networks, 22-03-2017, SSN College of Engineering, Chennai, India.


2015-16 Academic Year


1. Dr M V Subramanyam,“Introduction of Adaptive SLM and PTS Technique for Reduction of PAPR in MIMO-OFDM”, International Conference on Current Research in Emerging Trends of Engineering, 05-07-2015, Technology, Management, Arts, Sciences, Education.

2. Dr M V Subramanyam,“Hybrid Genetic Fuzzy Approach for Power Control Cross Layer MAC Protocol in Wireless Network”, International Conference on Control, Instrumentation, Communication and Computational Technologies, 07-07-2015, Noorul Islam University,Nagarkoile,Tamilnadu.

3. Dr M V Subramanyam,“MPGA: QOS Adequacy Latitude Aware Cooperative Spectrum Sensing in Cognitive Wireless Mesh Networks B”,InternationalConference on Power, Control, Communication and Computational Technologies for Sustainable Growth, 11-12-2015, G Pulla Reddy Engineering College,Kurnool.


2014-15 Academic Year


1. Dr. M.V. Subramanyam, “Land Cover Classification of RISAT-1 Data”, National Conference on Water, Environment &Society

2. Dr. M.V. Subramanyam, “TextureBased Classification of Microwave imaginary”, National Conference on Water, Environment &Society