Department of ME

Academic Year 2019-20:

Following faculty members presented technical papers in 3rd National Conference on Otimzation Techniques and Recent Innovations in Design, Manufacturing and Thermal Engineering held on 13th June 2020 at SREC Nandyal.

1. Dr. Ramesh Raju, Presented on “Shape Memory Alloy Manufacturing by Laser and Challenges in Machining”

2. Dr. K. Nagaraju presented on “Modelling and Static Analysis of Gas Turbine Blade”

3. Dr. K. Nagaraju presented on “Dr. K. Nagaraju presented on “Modelling and Static Analysis of Gas Turbine Blade”

4. Mr. M. Ravichandra Presented on “An Experimental Study on an EGR System Fuelled With Animal Pig Fat Oil With Performance and Emission Characteristics on a CI Engine”

5. Mr. M. Ravichandra Presented on “Design and fabrication of agriculture cultivator for dry lands”

6. Mr. P. Madhraghava Presented on “Modelling and Analysis of Four Wheeler Airless Tire Using Ansys”

7. Mr. P. Madhraghava Presented on “Exploration and Surveillance Robot by using RockerBogie Mechanism”

8. Mr. P. Nagaraju Presented on “Fabrication of Manually Operated Agricultural Multi-Purpose Cutter”

9. Mr. P. Nagaraju Presented on “Design and Analysis of a Composite Leaf Spring for Light Motor Vehicles”

10. Mr. P. Obulesu Presented on “Effect of water cooled condenser in a domestic refrigerator”

11. Mr. S. Kwaja Moinuddin Presented on “Analysis of vapour compression refrigeration system with experimental setup of accumulator with 2-different diameter capillary tubes”

12. Mr. S. Kwaja Moinuddin Presented on “Modelling and sturctural analysis of alloy wheel of a four wheeler vehicle”

13. Mr. K.L Srinivasulu Presented on “Investigations on HHO Gas and LPG Enriched Gasoline as alternative fuels, on the performance of Single cylinder 4-S S.I engine”

14. Mr. K.L Srinivasulu Presented on “Design and fabrication of prototype green house for plant protection-Agricultural high tunnel applications”

15. Mr. S. MD Younus Presented on “Optimization of Biogas Generation from Household Waste”

16. Mr. S. MD Younus Presented on “Power generation through radiator heat”

17. Mr. P. Harish Kumar Presented on “Design and Fabrication of versatile Material Handling Machine”

Following faculty members presented technical papers in ICAEMS 2019, held on 26th and 27th July 2019 at SREC Nandyal.

18.  Dr. Ramesh Raju, Presented on “Experimentation and Process Parametric Optimization of 3D Printing of ABS Based Polymer Parts”

19. Dr. K. Nagaraju, Presented on “Experimental Investigation on Velocity and Angle of Butt Weld Joint by using TIG Welding”

20. Mr. P. Moulali, Presented on “Experimental study on CI Engine by using MicroAlgae Oil and their blends”

21. Mr. M. Ravichandra, Presented on “Effect of Exhaust gas Recirculation and Cerium Oxide on Tyre Pyrolysis oil blends”

22. Mr. P. Nagaraju, Presented on “Experimental Investigation on the performance of tyrepyralysis oil blended with Palmstearin Methyl Ester As a fuel for Single Cylinder IC Engine”

23. Mr. S. Kwaja Moinuddin, Presented on “Design and Investigation of a Go E-KART Frame by Utilizing CAD Tools”


Academic Year 2018-19:


Following faculty members presented technical papers in 2nd National Conference on Advances in Engineering Management and Sciences (NCAEMS-2018) held at SREC Nandyal.

1. Dr. Ramesh Raju, Professor of ME presented on “The Microstructure Evolution Behavior of Nickel Based Super Alloys on Different Coating Techniues A Review”

2. Dr. K. Nagaraju presented on “Experimental Investigation on Multi Axis Drilling Machine”

3. Mr. M. Ravichandra, Asst. Professor presented on “Design and Study of Sugarcane Juice Engine Spur Gears under Static Load Condition by Using Finite Element Analysis”

4. Mr. P. Madhuraghava Asst. Professor Presented on “Design and Modeling of TwoWheeler Pneumatic Powered”

5. Mr. P. Nagaraju, Asst. Professor presented on “Design and Structural Analysis of NonConventional Energy Tracking System for Low Cost Applications”

6. Mr. P. Obulesu, Asst. Professor presented on “Effect of Sub-Cooling and Diffuser on the Coefficient of Performance of VCRS using R-134a”

7. Mr. S. Kwaja Moinuddin, Asst. Professor presented on “Study and Experimental Analysis on Friction Drilling”


Academic Year 2017-18:


1. Dr. Ramesh Raju, Professor, Participated and Presented the Technical paper on “Prediction of Performance Measures in Spark Erosion Machining of Haste Alloy Using Multiple Regression Analysis” in ICAEMS’17 during 14-15 July 2017 in SREC, Nandyal.

2. Mr. P. Moulai, HOD of ME, has presented the Technical papers on “Performance and Emission Characteristics of Homogeneous Charged Compression Ignition Using Different Bio Diesel Fuels with Constant Temperature” in ICAEMS’17 during 14-15 July 2017 in SREC, Nandyal.

3. Mr. M. Ravichandra Asst. Professor has participated and presented a technical paper on “Fabrication of Windmill Reciprocating Water Pumping System” in ICAEMS’17 during 14-15 July 2017 in SREC, Nandyal.

4. Mr. P. Madhu Raghava Asst. Professor has participated and presented a technical paper on “Study of Mechanical and Micro structural properties of Polypropylene Reinforced with 6061-t6 Al alloy Nano composites” in ICAEMS’17 during 14-15 July 2017 in SREC, Nandyal.

5. Mr. P. Nagaraju Asst. Professor has participated and presented a technical paper on “Design and Analysis of Hybrid suspension system for four wheelers” in ICAEMS’17 during 14-15 July 2017 in SREC, Nandyal.

6. Mr. O. Jayaramudu Asst. Professor has participated and presented a technical paper on “Design and Fabrication of vertical axis Wind Turbine for power Generation” in ICAEMS’17 during 14-15 July 2017 in SREC, Nandyal.

7. Mr. V. Sudharashan, Asst. Professor has participated and presented a technical paper on “Experimental Invistigation of Hybrid Food Dryer using solar and Exhaust gas with copper fins” in ICAEMS’17 During 14-15 July 2017 in SREC, Nandyal.

8. Dr. Ramesh Raju, Professor of ME, presented following papers in International conference on Contemporary Design and Analysis of Manufacturing and Industrial Engineering Systems (CDAMIES-2018) held at NIT, Trichy, TN.

  • Investigations on Laser Glazing of Lanthanum Based TBCs using Taguchi Approach

  • Effect of Coating and Texturing on Machining of Grade 5 Ti Alloy using Semi Solid Lubricant

  • Comparison on Machining Performance of PeakAged PH Stainless Steel with Various Inserts

  • Microstructure and Wear Resistance Enhancement Of Nodular Cast Iron by Laser Surface Melting

  • Processing Optimization of Multiple Quality Characteristics on Electrical Discharge Machining of Haste Alloy using TOPSIS

Academic Year 2016-17:


1. Dr. Ramesh Raju, Professor of ME, presented following papers in 4th National Conference on Innovations in Mechanical Engineering (NCIME’16) held at Madanappalli Institute of Technology & Science, Madanapalli.

  • A Brief Literature Review on Dissimilar Joining of Al to Mg by Friction Stir Welding

  • Mathematical Modelling and Experimental Analysis of Coefficient of Friction during Dry Sliding Wear Behavior of Aluminium Metal Matrix Composites

  • A Review of Laser Based Machining Techniques for Nickel alloys

2. Dr. Ramesh Raju, Professor of ME, presented a technical paper on Building Integrated Solar Cells for Smart Village: A Best in Class Approach in International Conference on SMART CITIES (ICSC’16) held at RGM College of Engineering & Technology, Ndl, AP.

3. Dr. Ramesh Raju, Professor of ME, presented a technical paper on Recent Development of Laser Beam Treatment on Titanium Alloys: From Coating to Treatment A Review in International Conference on Emerging Trends in Engineering, Science & Technologies (ICETEST-17) held at Sri Venkateswara University College of Engineering, Tirupati, AP.

4. Dr. Ramesh Raju, Professor, Participated and Presented the Technical paper on “Optimization of Laser Metal Deposition Process Parameters using Taguchi Based Grey Approach For T16AL4V Alloy Coating” in ICAFM’17 During 03-05 May 2017 in ADHICET, Kanchipuram.

5. Dr. Ramesh Raju, Professor, Participated and Presented the Technical paper on “Investigations on Electrical Discharge Machining of Haste Alloy C276 Using Taguchi Approach” in ICAFM’17 during 03-05 May 2017 in ADHICET, Kanchipuram.