IRG

All India Council for Technical education (AICTE) Sanctioned a Skill Development Program entitled “Soldering and Brazing” under PradhanaMantriKoushalVikasYojana (PMKVY), to Mr. P. Moulali, HOD of Mechanical Engineering in the year 2017-18.

All India Council for Technical education (AICTE) sanctioned a skill development program entitled “Lathe Operator” under PradhanaMantriKoushalVikasYojana (PMKVY), to Mr. P. Nagaraju, Asst. Professor,

Dept. of Mechanical Engineering in the year 2017-18.

Research Activities
  1. B. Ramanjaneyulu was selected as full time research scholar in JNTUA in the Academic year 2016-17

  2. Mr. P. Moulali was selected as part time research scholar in JNTUA in the Academic year 2015-16 

  3.  R. Siva Kumar was selected as part time research scholar in JNTUA in the Academic year 2015-16 

Scientific Papers
  • Mr. P. Moulali, Asst. Professor of ME published following papers:

  • “Performance and Emission Characteristics of Homogeneous Charge Compression Ignition Engine with Different Bio Diesel Fuels” in IJET, 7 (4.24), Nov 2018. (Scopus)

  • “Effect of constant temperature on Homogeneous Charge compression Ignition (HCCI) using different blended bio diesel fuels” in IJPAM, Vol. 117, No.10, Nov 2017. (Scopus)

  • Mr. P. Madhu Raghava, Asst. Professor of ME published a technical paper on “Modeling and Structural Analysis of a 6-DOF Robot Spray Coating Manipulator” in IJES Journal, Vol.7, Issue.1, January 2018. (UGC Approved)

  • Dr. Ramesh Raju, HOD of ME published following papers:

  • “Recent Strategies in Laser Based M Influence of wire-EDM textured conventional tungsten carbide inserts in machining of aerospace materials (Ti–6Al–4V alloy)”, Materials and Manufacturing Processes (2019) (Accepted for publication). doi: 10.1080/10426914.2018.1544712. (SCIE)

  • “Experimental and Taguchi-Based Grey Approach of Laser Metal Deposition Technique on Nickel-Based Superalloy”, Transactions of the Indian Institute of Metals (2019) (Accepted for publication). doi: 10.1007/s12666-018-1474-x. (SCIE)

  • “Machining Performance and Tool Wear Analysis on Cryogenic Treated insert during end Milling of Ti-6Al-4V Alloy”, Journal of Manufacturing Processes, 36 (2018) pp.188 – 196. (SCIE)

  • “Modelling of Cr3C2–25% NiCr laser alloyed cast iron in high temperature sliding wear condition using response surface methodology”, Archives of Metallurgy and Materials, 63(3) (2018) pp.1303 - 1315. (SCIE)

  • “Optimization of process parameters in Electrical Discharge Machining of Haste Alloy C276 using Taguchi’s method”, Materials Today proceedings, 5(6) (2018), 14432-14439. (Scopus)

  • “Mathematical Modeling and Analysis of Spark Erosion Machining Parameters of Hastelloy C-276 Using Multiple Regression Analysis”, International Journal of Engineering Transactions C: Aspects, 31(6) (2018) pp. 997-1003.

  • “Investigation on Ti6Al4V laser metal deposition using Taguchi based grey approach”, Materials Today proceedings, 5(6) (2018) pp.14375-14383. (Scopus)

  • “Characterization of Lignocellulosic Fruit Fiber from Moringa Oleifera Husk as a Reinforcement for Polymer Composites”, International Journal of Mechanical and Production Engineering Research and Development, 8(8) (2018) pp.352-358. (Scopus)

  • “Effect of Textured tools on machining of Ti6Al4V alloy under lubricant condition”, Materials Today proceedings, 5(6) (2018) pp.14230-14236. (Scopus)

  • “Recent Strategies in Laser Based Machining for the Enhanced Service Life of Nickel Based Super Alloys”, International Journal of Advanced in Management, Technology and Engineering Sciences, 7 (11) (2017) pp.220-224. (UGC Approved).

  • Mr. M. Ravichandra Asst. Professor has published a paper on “Fabrication of Windmill Reciprocating Water Pumping System” in IJEIR, Volume 6, Issue 5, Sep 2017.

  • Mr. O. Jayaramudu Asst. Professor has published a paper on “Design and Fabrication of vertical axis Wind Turbine for power Generation” in IJEIR, Volume 6, Issue 5, Sep 2017.

  • Mr. V. Sudharashan, Asst. Professor has published a paper on “Experimental Invistigation of Hybrid Food Dryer using solar and Exhaust gas with copper fins” in IJEIR, Volume 6, Issue 5, Sep 2017.

  • Mr. P. MadhuRaghava, Asst. Professor, has published a paper on “Design & Fabrication of Pneumatic Powered Two Wheeler” in IJERA , Vol.7, Issue 4, April 2017.

  • Mr. P. Moulali, Mr.B. Ramanjaneyulu, Asst. Professors Published a Paper on “CFDAnalysis Of Aerodynamic Trailer Devices For Drag Reduction Of Heavy Duty Trucks” in IJSETR Journal, Vol-55, issue 17, ISSN:2319-8885, July 2016.

  • Mr.P. Nagaraju, M. Ravichandra, R.Sivakumar&P.Madhuraghava Asst. Professors Published a Paper on “Design of Hybrid Dynamic motion Attenuation System” in IJSETR Journal, Vol-5, issue 7, ISSN:2278-7798, July 2016.

  • Mr.R.Siva Kumar, Dr.K.Thirupathi Reddy,  Mr.P. MadhuRaghava&Mr. P. Nagaraju Asst. Professors Published a Paper on “Soot Formation in Diesel Engine by CFD” in IJERA Journal, Vol-6, issue 6, ISSN:2248-9622, June 2016. 

  • Mr.K.LSreenivasulu, D.Srikanth, K.Rafi&B.Ramanjaneyulu Asst. Professors Published a Paper on “Optimization Of Air Filter In An Automobile Diesel Engine By Using Cfd Analysis” in IOSR Journal, Vol-13, issue 2, ver-II, April 2016.

  • Mr.M.Ravichandra, A.Salmon,&P.Nagaraju Asst. Professors Published a Paper on “Design and Structural Analysis of Alloy Wheels for Light Weight Vehicles” in IOSR Journal, December 2015.

  • Mr. M.Ravichandra et al Published paper title “Modeling of a bucket air cooler by using solar energy” in International Journal of modern Engineering Research (ISSN: 2249-6645); Vol-4, Issue 10, October 2014 page no: 20-33.

  • Mr. P.Moulali Published paper title “Fatigue analysis of leaf spring by using Ansys work bench” in International Journal of Engineering Research (ISSN: 2277-1581); Vol-4, Special, March 2014 page no: 98-101.

  • Mr. P.Moulali Published paper title “investigation  on friction stir weldments of AA6351-T4 alloys due to the weld direction” in International Journal of science and technology (ISSN:2229-5216) Vol-3, No. 6,2011.